Dodge Challenger Forum banner

Splash Guards on an SRT

2K views 9 replies 9 participants last post by  BWG56 
#1 ·
I'm in the Pacific NW and boy do the 20" x 9.5" Perillis throw up some splash on the side of the car when hitting the smallest amount of moisture.

Wondering if anyone has found so good splash guards that help prevent this "when driving straight at least" and look good with the cars profile.

Pics would be appreciated.

Thanks Folks.
 
#2 ·
I have the Mopar Brand formed splash guards. They look good and work well.
 

Attachments

#3 ·
I like the MOPAR ones that I have seen on Challengers...
 
#5 ·
Just installed the Mopar splash guards on my 2017 SPS. Paid about $70 on Amazon. Look very good. You will have to drill a new screw hole in each front fender. Hard for me to do on a car with 50 miles on it. Just held my breath while drilling. Also you will have to take off the back tires. I have the Dynamics package with the wider tires and they seem to work good.
 
#10 ·
Just installed the Mopar splash guards on my 2017 SPS. Paid about $70 on Amazon. Look very good. You will have to drill a new screw hole in each front fender. Hard for me to do on a car with 50 miles on it. Just held my breath while drilling. Also you will have to take off the back tires. I have the Dynamics package with the wider tires and they seem to work good.
I didn't drill into the fender, instead I used the plastic rivet and barrel tool to fasten the top of the flap to the wheel well liner, I also put 3m clear bra on the car where the mud flap touches the paint so it doesn't make the clear coat white from vibration.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top