Dodge Challenger Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 29 Results
  1. Dodge Challenger Interior Mods & Audio / Video
    I just got a 2012 392 a couple months ago and I am having trouble finding parts for it, specifically the shifter assembly ( manual 6 speed ) just the knob and shaft that's attached with two bolts. This is my first challenger and I'm new, so I want to make sure i get the right parts for...
  2. Dodge Challenger Mechanical Problems and Questions
    I'm removing the shifter, but the last bolt that connects the shifter assembly to the shifter is stuck and I seem to just be stripping it the more I try to dislodge it. I have applied some PB blaster and attempted using different tools but the harder I pull it the more it seems to strip the nut...
  3. Dodge Challenger Interior Mods & Audio / Video
    After trying to address "notchiness" for a while, I found that replacing the transmission fluid with royal purple made things feel better. Thinking the barton would only make things better, I reinstalled the barton shifter but found that switching between gears is rough and has clicks/notches...
  4. Dodge Challenger Interior Mods & Audio / Video
    Installed a barton shifter, but I get a kind of scraping sound in 1st and 2nd gear.. hard to explain. Hopefully it can be heard in this video. I have not tried teflon tape yet but wondering what others have done to rectify if they've had the same problem.
  5. Dodge Challenger Interior Mods & Audio / Video
    I was one allen key too short, but I got it in last night and it feels great. As others have said, it's a much more solid feel than the stock shifter and looks marvelous. Getting into reverse and first seem easier, though the notchiness getting into gears is still there. I'm noticing it...
  6. Dodge Challenger Interior Mods & Audio / Video
    I want to get the barton shifter with the flat stick, as i've heard the OEM one is not as good an experience. Will I be able to use the stock shifter knob on it or will that become garbage once I install a Barton?
  7. Dodge Challenger Interior Mods & Audio / Video
    Show off your snazzy shifter! I'm looking at manual shifters (probably a Barton) for my 2015 RT+ Shaker and I'm looking for inspiration
  8. Challenger Performance Mods - Engine - 6.1L HEMI
    have a 2009 Challenger SRT8 and even after I put the skip shift Eliminator on it's still grinds a bit going from first to second no matter how easy I am on it, does seem to go away a bit once it gets warmed up better but never fully. Does anybody know a method to make it fully go away.
  9. Challenger Performance Mods - Engine - 5.7L HEMI
    Has anyone done a pistol grip in their car? I would like to get one someday but they are expensive. 350 bucks. Any thoughts?
1-9 of 29 Results
Top