[jmedina0107]

I just installed a catch can with the Z bracket on my RT. I had to remove the engine cover to do this. So now I'm interested in installing some half covers to replace the full cover I had. Does anyone know where I can get a set? The ones I've seen on ebay state that they only work up to 2012. Any suggestions would be appreciated.

 

[jklotz10]

You can get a set from a 392 and modify them to get rid of the '392' badging. There's several threads out here that show the process and end results....
http://www.challengerforumz.com/showthread.php?t=76892&page=5

Or you can contact 3GCustomz - one of our Z vendors.

http://www.challengerforumz.com/showthread.php?t=107360

Look for the 3GCustoms picture thread for a zillion examples of their covers people have installed as well as other 3G items.

http://www.challengerforumz.com/showthread.php?t=52092

 

[TikiMan]

Your possibilities are endless what you can do to the covers.

 

[zxsix]

I have the 3gcustomz on my car. I had to add a spacer to where the z bracket mounts to keep the catch can and the engine cover from touching. No big deal.

 

[cdahl383]

Here's what mine look like. I just picked up some 392 half covers from the dealership, ground off the 392 Hemi lettering, got some custom badges made up at Rebadge, stuck them on with 3M VHB tape, and called it a day.

Think it cost me around $150 to do it. The covers were $80 and the badge was $75 or so I think? Looks much better than the stock engine cover to me and retains the stock factory look.

 

[Rdchallenger12]

Try Steve white parts on EBay. They sell the covers already modified to say 345 Hemi. Come in different font colors as well.