Dodge Challenger Forum banner
1 - 3 of 3 Posts

· Registered
3 Posts
Discussion Starter · #1 ·
Hi There

I just recently bought a very nice used Mopar rear strut brace #P5155951AB for my 2014 SRT Core. My problem is...I do not have the original installation kit or instructions. Is there anyone out there that still has the original templates for cutting carpet?? Any help would be greatly appreciated.



· Packin up my game gonna head out west....
2,458 Posts
I installed my rear brace and then used a piece of cardboard to make a template to see where I'd need to make cuts for the bar. I then took the bar back out and put the carpet back in so I could mark where I needed to cut the carpet.

I only cut the carpet enough to pass the flat portion of the bar through and then bolted everything down. Here's a link to TJGS's thread that I found really useful when I was doing my install.

Take it easy

  • Like
Reactions: TJGS
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.