Dodge Challenger Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #1
Just curious is there any info on Specs for our 5.7's? Are autos and 6speeds the same grind?
 

·
Registered
Joined
·
63 Posts
Engine Rebuilder magazine had a good article in the March 2009 issue. "Rebuilding the Chrysler Hemi". It can still be viewed online. http://www.enginebuildermag.com/Article/68601/engine_rebuilding_technical_guide_2009.aspx
It's a very good read, compares the 5.7 and 6.1 and the parts used in each.

They list the 5.7 cam as,
duration @ .006 253 degrees intake, 253.7 degrees exhuast.
34 degrees of overlap.
valve lift .472 intake, .460 exhuast.
 

·
Registered
Joined
·
771 Posts
2010 white rt classic gaulrapp

Engine Rebuilder magazine had a good article in the March 2009 issue. "Rebuilding the Chrysler Hemi". It can still be viewed online. http://www.enginebuildermag.com/Article/68601/engine_rebuilding_technical_guide_2009.aspx
It's a very good read, compares the 5.7 and 6.1 and the parts used in each.

They list the 5.7 cam as,
duration @ .006 253 degrees intake, 253.7 degrees exhuast.
34 degrees of overlap.
valve lift .472 intake, .460 exhuast.
Thank You Dave
 

·
Registered
Joined
·
7,020 Posts
Great articles thanks guys, i dont have time to read them yet but i will later!!
 
1 - 12 of 12 Posts
Top