Dodge Challenger Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
Before I dish out for a complete exhaust, what is the cheapest way to make some noise, but not to excessive.
I have not been under the car yet, so what all would be needed to do some deletes, or modify the stock exhaust.
 

·
What's Old is New Again!
Joined
·
39,513 Posts
Either Blastin Bobs Resonator Delete kit or get your local exhaust shop to remove your resonators and bend you replacements. Mine cost me $80.00
 

·
Registered
Joined
·
173 Posts
Either Blastin Bobs Resonator Delete kit or get your local exhaust shop to remove your resonators and bend you replacements. Mine cost me $80.00

Now when you tell them to "bend" would I just ask them to take off my resonators and put straight pipes???
 

·
Registered
2010 SRT Challenger Brilliant Black M6
Joined
·
58 Posts
They will bend up new pipes, but if you have them add a glasspack it will tone it down just a little. This is the current setup I have and was well worth the 250 bucks I spent.
 
1 - 5 of 5 Posts
Top