Dodge Challenger Forum banner
1 - 4 of 4 Posts

· Silent Service
269 Posts
Discussion Starter · #1 ·
I have the script Challenger grille emblem installed and have a pair of the matching front fender emblems and red brake caliper covers with the same script on them to install. I was wondering if someone that has them that were applied at the factory could do some placement measurements for me? The following would be hugely helpful.....

1) Distance from the body line to top of the C
2) Distance from the back of the fender (where it meets the door) to the emblem.


· Registered
745 Posts
Hi, although my script is also aftermarket, My dealer installed mine, as so... 3 3/4 from door edge, and 3 1/2 down from fender line to bottom of script, looks like factory installed.
Hope this helps...
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.