Dodge Challenger Forum banner

Hello From Houston area Texas

969 Views 20 Replies 21 Participants Last post by  Mysty1
Just placed my order today to build me a TorRed 2015 SRT-392!!!
Will be a couple of months until it's delivered but wanted to stop in and say hi. I'll be looking around here for any and all info about Challengers. It'll be my first coming from an Infiniti G37S. Can't wait to feel the power!!!!!

1 - 20 of 21 Posts
Welcome from north N.J.
Hello from Strasburg, VA

Hello and Welcome to the 'Z' from the beautiful Shenandoah Valley of Virginia. :wavey: Enjoy your Ride(when you get it) and the Site! You'll find some knowledgeable and friendly people to answer your questions or just entertain you. Glad you could join us!
Welcome to the Z from NC! Glad you joined, enjoy the site!
Welcome from NJ.
Glad to have you here !
Hello and Welcome to the “Z” from Pittsburgh, PA! Congratulations to you on the Challenger!
Welcome to the Z from Key West! Enjoy!
Welcome from AZ.
Welcome to the forum.
:Racing: Hello and Welcome to the "Z Family" from Wyandotte Michigan !!! :Racing:

Hi and a warm welcome to the forum. Sounds like you got yourself a great car. Good choice of color!
Welcome to the Z from New Mexico! You have found the absolute best spot for a Challenger lover to be except for behind the wheel! E
Hello & welcome from WI!
Welcome to the Z from FL. Lots of great info here. Enjoy !
welcome Andrew....enjoy the Z...hope it keeps you busy enough to get through your wait.

The anticipation has got to be killing you! If you ever see a yellow challenger flying down the beltway with a half a dozen constables after it, that'd be me.

AutoAnything is the one stop shop for mods! We price match and offer forum member discounts.

PM me or select the CHAT option if you have any questions!

Welcome from Houston Texas (Tomball) area. Be sure to check out **************** the local Houston LX club. BR549
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.