Well it has arrived. Finally!!!! Haven't gone to pick it up as the windows are being tinted. Hopefully tomorrow I'll get her. Has taken every ounce of me not to drive to the dealership to look at her. What's another day right? Will post pics after pick up.
It finally made it!!!!!
1 - 20 of 25 Posts
Joined
·
3,536 Posts
congrats! i saw you post it on facebook.
Joined
·
21,357 Posts
Congratulations on that nice looking ride !
Good luck !
Good luck !
Joined
·
9,409 Posts
Congrats. The wheels look great against the white.
Ron,
I know right? It was difficult but I was able to do it. Knew I wouldnt be able to drive her home so I didn't go. Plus dealership sales manager was probably already sick of me for bugging him for the last 7 weeks. I didn't want to slow down the tinting process either.
I know right? It was difficult but I was able to do it. Knew I wouldnt be able to drive her home so I didn't go. Plus dealership sales manager was probably already sick of me for bugging him for the last 7 weeks. I didn't want to slow down the tinting process either.
That is a very nice Challenger. I love those wheels!! Can't wait to see more pics! Congrats!!
Joined
·
1,688 Posts
Congratulations!
Please tell me they didn't put that hideous Front Plate Bracket on the Car. I'm in CA, another Two Plate State and when I got my 15 SXT Plus, the Bracket was already installed.
I took it off thinking they only drilled TWO holes in the Bumper, but there were two more on the underside of the Bumper. To say I was PISSED seeing that would be an understatement.
To make the best of a bad situation, I bought a set of painted matching Plugs for the top holes and ended up using the bottom holes to mount the Front Plate.
Used a small Bracket since the holes didn't line up with the ones on the actual Plate.
Bought the flexible License Plate wraparound that Pep Boys sells rather than a License Plate Frame to allow the Plate and Bracket to bend in the middle to fit the Bumper contour.
The Plate doesn't stick out and it bends back toward the lower Grill without blocking the airflow. I'll Post a pic when I have a chance.
Congratulations on the Car. I just sold my 2014 Corvette Stingray and the Uconnect system and Navigation in the Challenger is much more user friendly than the one I had in the Corvette. I was very impressed with the ease of use.
Obviously I do miss the HP and Torque of the Vette, but the V-6, especially with the 8 Speed Automatic Transmission in Sport Mode really moves considering the Challenger is such a large Car.
Enjoy...
I took it off thinking they only drilled TWO holes in the Bumper, but there were two more on the underside of the Bumper. To say I was PISSED seeing that would be an understatement.
To make the best of a bad situation, I bought a set of painted matching Plugs for the top holes and ended up using the bottom holes to mount the Front Plate.
Used a small Bracket since the holes didn't line up with the ones on the actual Plate.
Bought the flexible License Plate wraparound that Pep Boys sells rather than a License Plate Frame to allow the Plate and Bracket to bend in the middle to fit the Bumper contour.
The Plate doesn't stick out and it bends back toward the lower Grill without blocking the airflow. I'll Post a pic when I have a chance.
Congratulations on the Car. I just sold my 2014 Corvette Stingray and the Uconnect system and Navigation in the Challenger is much more user friendly than the one I had in the Corvette. I was very impressed with the ease of use.
Obviously I do miss the HP and Torque of the Vette, but the V-6, especially with the 8 Speed Automatic Transmission in Sport Mode really moves considering the Challenger is such a large Car.
Enjoy...
1 - 20 of 25 Posts
