The Scat Pack Bees in the pic came from him and the Challenger nose and Steering wheel badges came from him.

By the way, if you think those are something you want, I'll give them to you If I can find them that is this is an old pic.

 

i have a question are they badges or stickers? cause they look good but dont look like a emblem to me.. thats kinda close to what I was going for if you can find them pm me

 

i have a question are they badges or stickers? cause they look good but dont look like a emblem to me.. thats kinda close to what I was going for if you can find them pm me

I wuz wrong.......... it happens :4-dontknow:
The Scat Pack bees came from him the Steering Wheel and Nose badge came from Challengercollection.com.
They are more like 3d decals than emblems.
Still have not looked for them will today sometime.

 

I picked up my "SXT/6" emblem from him.

It's awesome work!

They are resin-based "decals", but they look amazing. (I won't put anything cheap-looking on my baby!)

 

How is the steering well badge attached?

 

I got my rear spoiler badge from him, as well as a dash badge and a steering wheel badge. He does great work!

 

He does excellent work. I got a rear spoiler emblem from him, custom designed Special Edition R/T that fit in the srt8 indentation perefectly. He also did a run of scat pack bees for the rear quarter glass and one for the rear spoiler, He also just finished a custom vinyl wrap graphic for my engine cover, custom r/t emblems and door sill graphics, He also does great work on nose badges, steering wheel badges etc.

this is right after i put the graphic on, this weekend i filled in the area around the 5;7L V8 emblem in black so it would stand out better and blend into the graphic better. I did some photoshop work on the dragon graphic removing two characters i didn't want in the picture, and he was able to put it to vinyl. The R/T emblems on the doors were disigned after the 69 r/t emblem (chrome slash) came out fantastic. His prices are also more than fair. Usually takes a couple weeks after the order goes in, but you don't pay till he is finished with them and they are ready to ship.

the yellow text was originally in the area where the cutout section was, i still have to clean up the edges, especially on the left side where i trimmed it

 

I picked up my "SXT/6" emblem from him.

It's awesome work!

They are resin-based "decals", but they look amazing. (I won't put anything cheap-looking on my baby!)

What size is that badge? It looks amazing on your spoiler. I MUST have one.

 

What size is that badge? It looks amazing on your spoiler. I MUST have one.

He hasn't been on the site this year. Maybe he'll come on and reply. It looks like the badge has to be about 4 or 5 inches in length.

 

He hasn't been on the site this year. Maybe he'll come on and reply. It looks like the badge has to be about 4 or 5 inches in length.

Doesn't mean I'm not lurking.

ramage, it's factory-sized, if I'm not mistaken. Just under 6 inches long.

I *just* got another one from Rebadge. Custom for my wife's new Blacktop Charger. We haven't put it on yet, but I'm SUPER happy with it...

(I should mention that my wife has added an awesome blue pin-stripe design to Raven, as well as some nice blue bling from the guys at BilletTech.)

 

I can see Nate does good work, but I've been trying to correspond with him for the last couple of weeks and he ignores my emails. I he can't take the few seconds to at least acknowledge my questions, then I guess I'll have to look elsewhere.

 

I can see Nate does good work, but I've been trying to correspond with him for the last couple of weeks and he ignores my emails. I he can't take the few seconds to at least acknowledge my questions, then I guess I'll have to look elsewhere.

He's usually pretty quick to respond, but he's a pretty busy guy. I can tell you his stuff is certainly worth waiting for.

 

He's always answered me fairly quick, orders tended to arrive in about 3 weeks, but he would send a note when shipped. I can dig up his latest correspondence if needed. He does answer PMs also. His website doesn't always work for me, but that could be my browser. If he didn't answer your first inquiry, after a few days send another, can say you sent previously but it may not have reached him (diplomatic) If you can design or explain clearly what you want, he can do it emblem wise.

 

He also has a Facebook page
https://www.facebook.com/pages/ReBadge-Design-Graphics-LLC/161691130540938

Just ordered from him again! I've had the gas door emblem replaced, steering wheel and Nose Badge, now Having a custom "HEMI" badge being done for my Shaker, He's usually known the sizes for most of the stuff I've asked for, and he's so creative f you give him your ideas and the direction you may wanna go!

 

Nate does great work.He did the SXT6 Blacktop Edition badges i have on mine also,dude is good at what he does.

 

I have just completed an order with him, mine should arrive in a day or two. I do know a couple of things that may explain the delay for you.
1 - It seems he has specific days for answering emails and the rest for production runs. He is awfully busy.
2 - In his first correspondence with me he stated that he was pretty sick recently, this contributed to my delay.

Both items I saw as acceptable since I was in no rush. I can tell you from experience that he is worth the wait. His work is nothing short of professional and he has great design ideas if you need help polishing you badge's look to come out the best. I would suggest you stick with it.

 

I have just completed an order with him, mine should arrive in a day or two. I do know a couple of things that may explain the delay for you.
1 - It seems he has specific days for answering emails and the rest for production runs. He is awfully busy.
2 - In his first correspondence with me he stated that he was pretty sick recently, this contributed to my delay.

Both items I saw as acceptable since I was in no rush. I can tell you from experience that he is worth the wait. His work is nothing short of professional and he has great design ideas if you need help polishing you badge's look to come out the best. I would suggest you stick with it.

Thanks for the heads up, Gr1zzly. Good to know.
I'm more confident I'll hear something back soon.

 

Thanks for the heads up, Gr1zzly. Good to know.
I'm more confident I'll hear something back soon.

Just trying to help. I'm sure you are like me when it comes to your car, nothing but the best. You wouldn't hire Bob Ross to paint you a picture when Picasso is available. Sure both have a reputation but come on.

Good luck with your badges.
Post pictures when you get them done!

I will be posting pix of mine in "what did you do to your car today?" (don't want to hijack your post)

 

Doesn't mean I'm not lurking.

ramage, it's factory-sized, if I'm not mistaken. Just under 6 inches long.

I *just* got another one from Rebadge. Custom for my wife's new Blacktop Charger. We haven't put it on yet, but I'm SUPER happy with it...

(I should mention that my wife has added an awesome blue pin-stripe design to Raven, as well as some nice blue bling from the guys at BilletTech.)

Thanks for lurking ........and replying

 

I sent an email the beginning of the month and his site said he was on vacation. When he got back he was quick with my order, and I should see my products in a few days. I too was in no big hurry, just planning ahead. If his quality is half as good as his reputation here, the slight wait will be more than worth it. I've ordered things from larger companies and waited just as long. if the quality is good, waiting is acceptable to me, just keep me informed, and he does that.

 

I sent an email the beginning of the month and his site said he was on vacation. When he got back he was quick with my order, and I should see my products in a few days. I too was in no big hurry, just planning ahead. If his quality is half as good as his reputation here, the slight wait will be more than worth it. I've ordered things from larger companies and waited just as long. if the quality is good, waiting is acceptable to me, just keep me informed, and he does that.

Fixed my problem. It was the ISP filtering Nate's messages. All squared. :smileup:

 

I've heard a lot of good things about nates work. I've almost ordered from him several times I'm just indecisive on the design.

 

Got my items in the mail the other day and they look great. I'm hoping the weather holds out and I can get them installed!!!!

 

Nate does awesome work...you will not be disappointed!

 

heres my new Shaker emblems